Brady BBP11-34L Manual do Utilizador descarregar pdf (Página 32)

BBP11-24L / BBP11-34L

Bar Code Printer User Manua

BBP11 User Manual

Density 8

Label Width <4”> (<101.5 mm>)

Label Height <4”> (<101.5 mm>)

Sensor Type Gap sensor

Gap Setting 0.12” (3.0 mm)

Print Direction 0

Reference Point 0,0 (upper left corner)

Offset 0

Tear Mode On

Peel off Mode Off

Cutter Mode Off

Serial Port Settings 9600 bps, none parity, 8 data bits, 1 stop bit

Code Page 850

Country Code 001

Clear Flash Memory No

IP Address DHCP

4.3.4 Set Black Mark Sensor as Media Sensor and Calibrate the Black Mark Sensor

Please follow the steps as below.

1. Turn off the power switch.

2. Hold on the button then turn on the power switch.

3. Release the button when LED turns green/amber after 5 green blinks. (Any

green/amber will do during the 5 blinks).

 The LED color will be changed as following:

Amber  red (5 blinks)  amber (5 blinks)  green (5 blinks)  green/amber (5

blinks)  red/amber (5 blinks)  solid green

4.3.5 Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor

Please follow the steps as below.

1. Turn off the power switch.

2. Hold on the button then turn on the power switch.

3. Release the button when LED turns red/amber after 5 green/amber blinks. (Any

red/amber will do during the 5 blinks).

 The LED color will be changed as following:

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Sem comentários

Brady BBP11-34L Manual do Utilizador Página 32