Brady BRADYMARKER XC Plus Manual do Utilizador descarregar pdf (Página 12)

Page

BRADYMARKER™ PS printer

(continued)

E. Printing other markers

To print Bradymaker labels other than PermaSleeve marker.

1. Replace the unwind assembly with the roll holder brackets

(See Fig. 1, pg.1).

2. Replace the printer cover with the standard “Plus” cover (with tear bar). Store the unused

items in the Bradymarker carrying case for future use. Set the print gap to its smallest

setting, as described in Section B, pg. 7. Then follow the instructions in the tutorial section.

F. Maintenance & Troubleshooting

In general, follow the instructions in the cleaning & maintenance and troubleshooting sections.

Pay particular attention to the following items.

1. The drive roller and nip roller o-ring need to be cleaned occasionally to ensure proper

feeding through the printer. Refer to “A stuck label removal”, for instructions on removing

and installing the material chute assembly. Clean both the drive roller and nip roller o-rings

with isopropyl alcohol.

2. The position of the optic scanner within the print head gap adjuster mechanism is critical. If

bumped, the scanner may move inside its holder, resulting in one of the following *error

messages. The front end of the metal optic scanner should be aligned with the bottom front

edge of the plastic holding clip. Gently slide the scanner inside the holding clip to re-align,

if necessary.

* Please verify size

Scanning error

Out of markers

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 22 23

Sem comentários

Brady BRADYMARKER XC Plus Manual do Utilizador Página 12