Brady Wraptor Guia do Utilizador Página 20
- Página / 72
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Step 5. Configure for USB Operation
This step describes how to configure the computer and Wraptor to communicate via a USB cable. If
you are not using a USB cable, skip this step.
NOTE: You must complete the Install the Wraptor Printer Driver procedure
on page 11 before configuring the printer driver for USB operation.
To configure for USB operation:
1. Plug the provided USB cable into the computer and the Wraptor unit.
2. On the Wraptor Control Panel:
Select the CONFIG tab.
Select USB as the Connection Type.
The Wraptor is ready to print and wrap via the USB connection.
Step 6. Configure for Serial Operation
This step describes how to configure the computer and Wraptor to communicate via a serial cable.
If you are not using a serial cable, skip this step.
NOTE: You must complete the Install the Wraptor Printer Driver procedure on
page 11 before configuring the printer driver for serial operation.
1. Connect the computer to the Wraptor with a DB9 female to DB9 male straight through cable.
2. On the Wraptor Control Panel:
Select the CONFIG tab.
Select Serial as the Connection Type.
NOTE: Remote control uses the serial port to communicate with the Wraptor.
Therefore, the Connection Type cannot be Serial when remote control is in use.
The Wraptor is ready to print and wrap via the serial connection.
Step 7. Configure for Ethernet (TCPIP) Operation
This step describes how to configure the computer and Wraptor to communicate via an Ethernet
(TCPIP) connection. If you are not using a local area network, skip this step.
NOTE: You must complete the Install the Wraptor Printer Driver procedure
on page 11 before configuring the printer driver for Ethernet (TCPIP)
operation.
1. Connect the computer to the LAN and connect the Wraptor to the LAN.
2. Power the Wraptor on.
3. Select Start Settings Printers.
4. Right-click on the Wraptor icon. The Wraptor Properties dialog appears.
5. Click the Ports tab.
Wraptor™ User’s Guide 13
- User’s Guide 1
- Copyright 2
- Regulatory Information 3
- Brady Warranty 3
- Wraptor™ User’s Guide III 4
- Table of Contents 5
- Table of Figures 7
- Chapter 1 Introduction 8
- 1.4 Technical Specifications 9
- Wraptor™ User’s Guide 3 10
- Chapter 2 Safety 11
- 2.2 Electrical Safety 12
- 2.3 Warning Labels 12
- 3.1 External Parts 13
- Wraptor™ User’s Guide 7 14
- 4.1 Initial Setup 15
- 10 Wraptor™ User’s Guide 17
- Wraptor™ User’s Guide 11 18
- 12 Wraptor™ User’s Guide 19
- Wraptor™ User’s Guide 13 20
- IP Address Option 21
- 14 Wraptor™ User’s Guide 21
- Printer Name Option 22
- Wraptor™ User’s Guide 15 22
- 16 Wraptor™ User’s Guide 23
- 4.2 Load Label Material 24
- 18 Wraptor™ User’s Guide 25
- Wraptor™ User’s Guide 19 26
- 20 Wraptor™ User’s Guide 27
- Wraptor™ User’s Guide 21 28
- 22 Wraptor™ User’s Guide 29
- 4.3 Load the Printer Ribbon 30
- 24 Wraptor™ User’s Guide 31
- Wraptor™ User’s Guide 25 32
- 26 Wraptor™ User’s Guide 33
- Adjustment for Wire Bundles 34
- Wraptor™ User’s Guide 27 34
- 5.2 Using the Touch Screen 35
- Figure 12. File Tab Menu 36
- Wraptor™ User’s Guide 29 36
- Open Command 37
- 30 Wraptor™ User’s Guide 37
- 5.3.2 Run Tab Commands 38
- Figure 15. Goto… Dialog 39
- 32 Wraptor™ User’s Guide 39
- Figure 16. Setup Tab Menu 40
- Wraptor™ User’s Guide 33 40
- Figure 17. Adj Tab Menu 41
- 34 Wraptor™ User’s Guide 41
- Advanced Settings Menu 42
- Advanced Settings Commands 42
- Wraptor™ User’s Guide 35 42
- Figure 20. Config Tab Menu 43
- Connection Type 43
- Operating Modes 43
- 36 Wraptor™ User’s Guide 43
- File Location 44
- Remote Control 44
- Figure 21. IP Tab Menu 44
- Wraptor™ User’s Guide 37 44
- Entering Text 45
- 38 Wraptor™ User’s Guide 45
- Description of Settings 46
- Wraptor™ User’s Guide 39 46
- 40 Wraptor™ User’s Guide 47
- Wraptor™ User’s Guide 41 48
- 42 Wraptor™ User’s Guide 49
- 5.5 Power Off 50
- 44 Wraptor™ User’s Guide 51
- Wraptor™ User’s Guide 45 52
- 46 Wraptor™ User’s Guide 53
- Wraptor™ User’s Guide 47 54
- 48 Wraptor™ User’s Guide 55
- Wraptor™ User’s Guide 49 56
- Chapter 7 Maintenance 57
- Wraptor™ User’s Guide 51 58
- Figure 33. Clean Printhead 59
- 52 Wraptor™ User’s Guide 59
- Figure 34. Clean Rollers 60
- Wraptor™ User’s Guide 53 60
- Figure 35. Clean V-Rollers 61
- 54 Wraptor™ User’s Guide 61
- Wraptor™ User’s Guide 55 62
- 6. Close the unit doors 63
- 7.2 Lubrication 64
- 58 Wraptor™ User’s Guide 65
- Wraptor™ User’s Guide 59 66
- 60 Wraptor™ User’s Guide 67
- Chapter 8 Error Messages 68
- 62 Wraptor™ User’s Guide 69
- Wraptor™ User’s Guide 63 70
- 64 Wraptor™ User’s Guide 71
- 9.1 Consumable material 72
- 9.2 Accessories 72
Manuais e produtos relacionados com Impressoras de rótulos Brady Wraptor
Impressoras de rótulos Brady IDXpert Handheld Labeler Keyboard Layout Manual do Utilizador
(4 páginas)
(4 páginas)
(84 páginas)
Impressoras de rótulos Brady 200M-e 300 Especificações
(118 páginas)
(118 páginas)
Impressoras de rótulos Brady 1024 Guia do Utilizador
(55 páginas)
(55 páginas)
Impressoras de rótulos Brady 2024 Guia do Utilizador
(89 páginas)
(89 páginas)
Impressoras de rótulos Brady 260M Guia do Utilizador
(104 páginas)
(104 páginas)
Impressoras de rótulos Brady POWERMark Especificações
(128 páginas)
(128 páginas)
Impressoras de rótulos Brady 1024 Manual do Operador
(82 páginas)
(82 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.129 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais