Brady 1024 Manual do Operador descarregar pdf (Página 41)

4.5.5 Label Alignment Troubleshooting

Problem

Description

Possible Cause Solution

Attempting to

perform Label

Alignment results

in no paper

movement.

With the Present

Sensor enabled,

Label Alignment

can not be

performed

without a Label

Length.

 Set Label Alignment to AUTO,

press and hold FEED till paper

moves for automatic Label

Alignment Length

measurement.

~OR~

 Re-measure Label Alignment

Length, use Menu Setup to set

new length, ensure desired

length has been set.

First label wasted

during alignment.

All labels thereafter

print with proper

start of print

position.

Alignment

Length is too

long.

~OR~

For labels whose

label length and

stop position

cause them to

stop with a gap

on the edge

sensor, the

alignment

function can

result in wasted

labels.

 Set Label Alignment to AUTO,

press and hold FEED till paper

moves for automatic Label

Alignment Length

measurement.

~OR~

 Re-measure Label Alignment

Length, use Menu Setup to set

new length, ensure desired

length has been set.

 Obtaining a slightly different

label Alignment Length

measurement. Using label

alignment AUTO mode, hold

the FEED button to force an

alignment and label

measurement. Ensuring slack

in the label stock may result in

a slightly different

measurement. The Alignment

Length may also be set

manually via the Setup Menu.

Increasing or decreasing the

value by 1 or 2 units (in./100)

may help to prevent the wasted

labels, however this may result

in incorrect print positions for

labels that are short in length.

BP-1244/BP-1344 31

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 81 82

Comentários a estes Manuais

Sem comentários